Description
7,000 BTU/H of air-cooling capacity behind a full stainless-steel cabinet. A titanium tube-in-PVC- shell evaporator plumbs straight into the loop through built-in connections, and the digital controller maintains the setpoint with onboard short-cycle protection.
Specification | DS Plus |
Model | DSP007 |
Nominal capacity | 7,000 BTU/H |
Compressor | 1/2+ HP |
Refrigerant | R-454B |
Electrical | 120V / 1 Phase |
Power cord | 6 ft, NEMA 5-15P plug |
Fan air output | 1,708 CFM |
Evaporator | Titanium tube in PVC shell |
Water connections | 1" FPT inlet and outlet |
Water flow | 12 - 25 GPM |
Water pressure drop | 2 PSIG |
Water temperature range | 40°F – 80°F |
Ambient air temperature | 35°F – 110°F |
Control | Digital, short-cycle protection |
Cabinet | 304 Stainless Steel with marine coating |
Cabinet dimensions | 14 3/4" W × 18 1/4" D × 14 1/2" H |
Shipping dimensions | 30 1/2" × 18 1/2" × 18 1/2" |
Air clearance | 12" minimum, inlet and outlet |
Weight | 58 lbs |
Installation & Clearances
• Allow at least 12″ of air clearance at the condenser air inlet and at the air outlet.
• Plumb the FPT inlet and outlet for 12 –25 GPM; expect roughly 2 PSIG of pressure drop.
• Water 40 °F–80°F, air 35 °F–110°F. Contact Aqua Logic for temperatures outside these ranges.
• Utilize a GFCI 120V single-phase supply with the supplied 6 ft cord with a 5 – 15P plug.
• The safety water flow switch in the circuit protects the evaporator against no – flow, barrel freeze, and damage.
