Resources
Product Sizing, Specifications, Drawings, Literature and More.
Use the tables below to determine the appropriate Cyclone Chiller model for your application.
Please note that the tables make the following assumptions;
- Calculations based on a closed recirculating system with chiller running full time.
- Calculations based on a simple system with one pump, 3x per hour water turnover rate, and fluorescent lighting.
- Do not take into account, multiple pumps, protein skimmers, high intensity lighting, or other such variables.
Sizing Table 1-Uninsulated Tanks: Acrylic and Glass.
Note: For Polypropylene/ethylene multiply gallons x 0.8= net gallons.
Temperature “chill down” from ambient (oF) per tank volume (US Gallons)
Cyclone Drop-in Chillers | ||||||||||||||
Model No. | HP | Nominal BTUH | Volts/phase | Amps | Watts | Water flow (GPM) | Air output (CFM) | L (in.) | W (in.) | H (in.) | Coil Length (in.) | Coil Height (in.) | Shipping Weight (lbs.) | Shipping Dimensions (in.) |
CY-3 | 1/4 | 3000 | 115 | 5.4 | 621 | 8 – 15 | 240 | 17.5 | 13.5 | 11.25 | 7.25 | 2.125 | 53 | 26 x 16 x 15 |
CY-4 | 1/3 | 4000 | 115 | 7.2 | 828 | 10 – 20 | 260 | 17.5 | 13.5 | 11.25 | 9 | 2.125 | 62 | 26 x 16 x 15 |
CY-5 | 1/2 | 6000 | 115 | 9.5 | 1092 | 12 – 25 | 350 | 17.5 | 15.25 | 13.125 | 9.125 | 3 | 110 | 33 x 26 x 24 |
CY-6 | 1/2 | 6000 | 230/1 | 4.8 | 1104 | 12 – 25 | 350 | 17.5 | 15.25 | 13.125 | 9.124 | 3 | 112 | 33 x 26 x 24 |
*Add “CWCT” (cold water cap tube) to model # for desired water temps between 50-65F on available models.
Standard
- Ideal for tropical aquariums and warm water exhibits, or research applications.
- Capillary tube size allows a fixed amount of refrigerant to enter the titanium coil of the heat exchanger.
- Amount of refrigerant does not need to change since the water temperature is being maintained at a constant.
‘CWCT’ (Cold Water Cap Tube)
- Allows for a lower, but more limited temperature range.
- Ideal for bait fish holding, temperate fish exhibits, and hydroponics.
- Capillary tube size allows a fixed amount of refrigerant to enter the titanium coil of the heat exchanger.
- Amount of refrigerant does not need to change since the water temperature is being maintained at a constant.
The following tables can be used to determine the appropriate Delta Star Chiller Model chiller for your application.
Tables display the maximum water volume (Gallons) that can be maintained at a range of temperature differences below the ambient air temperature. Please note that the tables make the following assumptions, and that for more accurate sizing or complex systems you should contact Aqua Logic for assistance:
- Calculations based on a closed recirculating system with chiller running full time.
- Calculations based on a simple system with one pump, 3x per hour water turnover rate, and fluorescent lighting.
- Please consult Aqua Logic for proper sizing if using multiple pumps, protein skimmers, high intensity lighting, or other such variables.
Sizing Table 1-Uninsulated Tanks: Acrylic and Glass. Note: For Polypropylene/ethylene multiply gallons x 0.8= net gallons.
Temperature “chill down” from ambient (oF) per tank volume (US Gallons)
Delta Star® Air-Cooled Chillers | ||||||||||
MODEL | HP | BTUH REMOVAL CAPACITY | VOLTS/PHASE | AMPS | FLOW (GPM) MIN/MAX | IN/OUT FIPT (IN) | LENGTH (IN) | WIDTH (IN) | HEIGHT (IN) | SHIPPING WEIGHT (LBS) |
DS-3 | 1/4 | 3,000 | 115 | 5.4 | 8/15 | 3/4″ | 22 1/2″ | 13 1/2″ | 11 1/4″ | 62 lbs. |
DS-4 | 1/3 | 4,000 | 115 | 7.2 | 10/20 | 3/4″ | 22 1/2″ | 13 1/2″ | 11 1/4″ | 62 lbs. |
DS-5 | 1/2 | 6,000 | 115 | 9.5 | 12/25 | 1-1/2″ | 24″ | 15 1/4″ | 13 1/8″ | 110 lbs. |
DS-6 | 1/2 | 6,000 | 230 | 4.8 | 12/25 | 1-1/2″ | 24″ | 15 1/4″ | 13 1/8″ | 112 lbs. |
DS-7 | 3/4 | 9,500 | 115 | 15.4 | 15/30 | 1-1/2″ | 25″ | 24″ | 14 3/4″ | 145 lbs. |
DS-8 | 3/4 | 9,500 | 230 | 8.4 | 15/30 | 1-1/2″ | 25″ | 24″ | 14 3/4″ | 145 lbs. |
DS-9 | 1 | 12,000 | 230 | 9 | 20/35 | 1-1/2″ | 26 1/2″ | 28″ | 17 3/4″ | 150 lbs. |
DS-10 | 1 1/2 | 21,000 | 230 | 10.5 | 25/40 | 1-1/2″ | 26 1/4″ | 26″ | 17 1/2″ | 190 lbs. |
*Add “CWCT” (cold water cap tube) to model # for desired water temps between 50-65F on available models.
*Add “TXV” to model # for lower desired water temps between 40-80F on available models.
Standard
- Ideal for tropical aquariums and warm water exhibits, or research applications.
- Capillary tube size allows a fixed amount of refrigerant to enter the titanium coil of the heat exchanger.
- Amount of refrigerant does not need to change since the water temperature is being maintained at a constant.
‘CWCT’ (Cold Water Cap Tube)
- Allows for a lower, but more limited temperature range.
- Ideal for bait fish holding, temperate fish exhibits, and hydroponics.
- Capillary tube size allows a fixed amount of refrigerant to enter the titanium coil of the heat exchanger.
- Amount of refrigerant does not need to change since the water temperature is being maintained at a constant.
“TXV” (Thermal Expansion Valve)
- Provides both the lowest water temperature and the most broad temperature range.
- Required for applications where the unit will need to maintain a very cold temperature.
- Ideal for lobster tanks, cold water fish exhibits, or research applications.
- The thermal expansion valve constantly regulates the amount of refrigerant going to the heat exchanger based on the desired water temperature.
We will be happy to assist you in choosing the correct chiller for your application. Please Request a Quote and provide us with your information.
- INSTRUCTIONS- Delta Star Air-Cooled Chillers
- SPEC SHEET- 1/4Hp Delta Star Thru 1/2Hp Delta Star Chillers
- SPEC SHEET- 3/4Hp Delta Star Thru 1 1/2Hp Delta Star Chillers
- TWO-YEAR LIMITED WARRANTY-Delta Star Air-Cooled Chillers
- WIRING DIAGRAM-1/4Hp Delta Star Thru 1/2Hp Delta Star, Split Units, 115V
- WIRING DIAGRAM-3/4Hp Delta Star Thru 1 1/2Hp Delta Star, Split Units, 220v
- SIZING WORKSHEET
A number of factors influence the correct size of chiller required for your application. While standard Btu calculations can be applied, and our Multi Temp Chiller Specifications can offer some guidelines, the parameters of your application will be the deciding factor in correct size selection. Contact us today for help with sizing the perfect unit for your needs.
For spatial planning you can refer to the dimensions of each unit on our specifications table and use the following diagram as a guide. Custom sizes available.
Multi-Temp Chillers – Air Cooled | ||||||||||
Model No. | Nominal Tons | Nominal BTUH | Volts/phase | Amps RLA/LRA | Water flow (GPM) | Air Outlet (CFM) | H (In.) | L (in.) | W (In.) | Shipping Weight (lbs.) |
MT-1 | 2 | 24000 | 208-240/1 | 11/63 | 20 – 40 | 1282 | 59 | 44 | 33 | 370 |
MT-3 | 3 | 36000 | 208-240/1 | 18/77 | 20 – 40 | 2615 | 63 | 44 | 33 | 396 |
MT-4 | 3 | 36000 | 208-240/3 | 10/71 | 20 – 40 | 2615 | 66 | 44 | 33 | 386 |
MT-4-460 | 3 | 36000 | 460/3 | 6/38 | 20 -40 | 2615 | 66 | 44 | 33 | 386 |
MT-5 | 4 | 48000 | 208-240/1 | 23/124 | 30 – 60 | 2615 | 59 | 51 | 38 | 474 |
MT-6 | 4 | 48000 | 208-240/3 | 15/83 | 30 – 60 | 2615 | 63 | 51 | 38 | 474 |
MT-6-460 | 4 | 48000 | 460/3 | 7/41 | 30 – 60 | 2615 | 63 | 51 | 38 | 474 |
MT-7 | 5 | 60000 | 208-240/1 | 27/153 | 30 – 60 | 2785 | 70 | 51 | 38 | 520 |
MT-8 | 5 | 60000 | 208-240/3 | 17/110 | 30 – 60 | 2785 | 70 | 51 | 38 | 528 |
MT-8-460 | 5 | 60000 | 460/3 | 8/52 | 30 – 60 | 2785 | 70 | 51 | 38 | 528 |
MT-9 | 7.5 | 90000 | 208-240/3 | 28/164 | 60 – 120 | 5100 | 68 | 51 | 42 | 670 |
MT-9-460 | 7.5 | 90000 | 460/3 | 15/100 | 60 – 120 | 5100 | 68 | 51 | 42 | 670 |
MT-10 | 10 | 120000 | 208-240/3 | 35/225 | 60 – 120 | 7500 | 68 | 61 | 46 | 815 |
MT-10-460 | 10 | 120000 | 460/3 | 19/114 | 60 – 120 | 7500 | 68 | 61 | 46 | 815 |
MT-12 | 12 | 150000 | 208-240/3 | 50/149 | 60 – 120 | 7800 | 74 | 61 | 46 | 965 |
MT-12-460 | 12 | 150000 | 460/3 | 27/75 | 60 – 120 | 7800 | 74 | 61 | 46 | 965 |
MT-15 | 15 | 180000 | 208-240/3 | 50/164 | 120 – 180 | 9750 | 78 | 111.5 | 53 | 1559 |
MT-15-460 | 15 | 180000 | 460/3 | 25/100 | 120 – 180 | 9750 | 78 | 111.5 | 53 | 1559 |
MT-20 | 20 | 240000 | 208-240/3 | 78/267 | 120 – 180 | 9750 | 91 | 111.5 | 53 | 1714 |
MT-20-460 | 20 | 240000 | 460/3 | 40/142 | 120 – 180 | 9750 | 91 | 111.5 | 53 | 1714 |
MT-25 | 25 | 300000 | 208-240/3 | 82/267 | 120 – 180 | 15500 | 75 | 122 | 53 | 2000 |
MT-20-460 | 25 | 300000 | 460/3 | 40/142 | 120 – 180 | 15500 | 75 | 122 | 53 | 2000 |
- 2 Hp – 25 Hp
- Insulated Titanium Heat Exchanger
- TRANE Condensing Unit
- Dual Stage Digital Temperature Controller in NEMA4X enclosure
- Built in Safety Flow Switch
- Automatic Temperature Ranging
- Temperature Range down to 40ºF
- Includes stainless steel stand
- Fresh or Saltwater use
- All units suitable for outdoor use
- One-year warranty
- Allow 2 weeks for delivery
- Ships motor freight from factory
- Made in USA
- INSTRUCTIONS- 2Hp to 5Hp Multi-Temp Chillers (MT-1 Thru MT-8)
- INSTRUCTIONS- 7.5Hp to 20Hp Multi-Temp Chillers (MT-9 Thru MT-20)
- INSTRUCTIONS-20Hp to 40Hp Multi-Temp Chillers (MT-20 Thru MT-40)
- SPEC SHEET -2Hp-5Hp Multi-Temp Chillers (MT-1 thru MT-8)
- SPEC SHEET -7.5Hp-12Hp Multi-Temp Chillers (MT-9 thru MT-12)
- SPEC SHEET -15Hp-20Hp Multi-Temp Chillers (MT-15 thru MT-20))
- SPEC SHEET -25Hp Multi-Temp Chillers (MT-25)
- SPEC SHEET -30Hp Multi-Temp Chillers (MT-30)
- SPEC SHEET -40Hp Multi-Temp Chillers (MT-40)
- SPEC SHEET -2Hp-5Hp SLIMLINE SPLIT UNIT Multi-Temp Chillers (MTS-1 thru MTS-8)
- SIZING WORKSHEET
A number of factors influence the correct size of chiller required for your application. While standard Btu calculations can be applied, and our Multi Temp Chiller Specifications can offer some guidelines, the parameters of your application will be the deciding factor in correct size selection. Contact us today for help with sizing the perfect unit for your needs.
For spatial planning you can refer to the dimensions of each unit on our specifications table and use the following diagram as a guide. Custom sizes available.
Multi-temp Chillers Water-Cooled | ||||||||
Model No. | Nominal Tons | Nominal BTUH | Volts/phase | Condenser Water flow (GPM) | Evaporator Water flow (GPM) | H (In.) | L (in.) | W (In.) |
MT-1-WC | 2 | 24000 | 208-240/1 | 2 – 4 | 20 – 40 | 34 | 39.5 | 20 |
MT-3-WC | 3 | 36000 | 208-240/1 | 2 – 5 | 20 – 40 | 41 | 39.5 | 20 |
MT-4-WC | 3 | 36000 | 208-240/3 | 2 – 5 | 20 – 40 | 41 | 39.5 | 20 |
MT-4-460-WC | 3 | 36000 | 460/3 | 2 – 5 | 20 – 40 | 41 | 39.5 | 20 |
MT-5-WC | 4 | 48000 | 208-240/1 | 3 – 7 | 30 – 60 | 49 | 39.5 | 20 |
MT-6-WC | 4 | 48000 | 208-240/3 | 3 – 7 | 30 – 60 | 49 | 39.5 | 20 |
MT-6-460-WC | 4 | 48000 | 460/3 | 3 – 7 | 30 – 60 | 49 | 39.5 | 20 |
MT-7-WC | 5 | 60000 | 208-240/1 | 4 – 8 | 30 – 60 | 56.5 | 39.5 | 20 |
MT-8-WC | 5 | 60000 | 208-240/3 | 4 – 8 | 30 – 60 | 56.5 | 39.5 | 20 |
MT-8-460-WC | 5 | 60000 | 460/3 | 4 – 8 | 30 – 60 | 56.5 | 39.5 | 20 |
MT-9-WC | 7.5 | 90000 | 208-240/3 | 9 | 60 – 120 | 63.38 | 39.5 | 20 |
MT-9-460-WC | 7.5 | 90000 | 460/3 | 9 | 60 – 120 | 63.38 | 39.5 | 20 |
MT-10-WC | 10 | 120000 | 208-240/3 | 9 | 60 – 120 | 63.38 | 39.5 | 20 |
MT-10-460-WC | 10 | 120000 | 460/3 | 9 | 60 – 120 | 63.38 | 39.5 | 20 |
MT-15-WC | 15 | 180000 | 208-240/3 | 13 | 120 – 180 | 72.25 | 55 | 20 |
MT-15-460-WC | 15 | 180000 | 460/3 | 13 | 120 – 180 | 72.25 | 55 | 20 |
MT-20-WC | 20 | 240000 | 208-240/3 | 17 | 120 – 180 | 81.5 | 55 | 20 |
MT-20-460-WC | 20 | 240000 | 460/3 | 17 | 120 – 180 | 81.5 | 55 | 20 |
MT-20-WC | 25 | 300000 | 208-240/3 | 17 | 120 – 180 | 81.5 | 55 | 20 |
MT-20-460-WC | 25 | 300000 | 460/3 | 17 | 120 – 180 | 81.5 | 55 | 20 |
- 2 Hp- 25 Hp
- Insulated Titanium Heat Exchanger
- In-Line Tube In Shell Evaporator
- Remote Helix Titanium Coil
- Water Control Valve for condenser
- Remote Electronic Temperature Controller
- Includes Stainless Steel Frame
- Fresh or Saltwater Use
- Compact Design
- Quiet Operation
- Black ABS Cover
- Options for size and configuration
- Ozone Friendly Refrigerant (134A)
- SPEC SHEET -2Hp-5Hp Multi-Temp Water-Cooled Chillers (MT-1-WC thru MT-8-WC)
- SPEC SHEET -2Hp-5Hp VERTICAL Multi-Temp Water-Cooled Chillers (MT-1-WCV thru MT-8-WCV)
- SPEC SHEET -10Hp VERTICAL Multi-Temp Water-Cooled Chillers (MT-10-WCV)
- SPEC SHEET -5Hp SPA VERSION Multi-Temp Water-Cooled Chillers (MT-5-WC-SPA)
- SPEC SHEET -7.5Hp-20Hp TUBE SHEET Multi-Temp Water-Cooled Chillers (MT-9-WCTS thru MT-10-WCTS)
- SPEC SHEET -15Hp-20Hp TUBE SHEET Multi-Temp Water-Cooled Chillers (MT-15-WCTS thru MT-20-WCTS)
- SIZING WORKSHEET