Digital Temperature Controllers
Digital Temperature Controllers
$204.00 – $286.00
Aqua Logic’s digital temperature controllers can be used in a variety of applications where a device needs to be turned on / off based on temperature rise or fall.
The Single Stage controller is for use with only one device, a chiller or a heater for example.
The Dual Stage controller can be connected to both a chiller and heater, but only allows one of the devices to be on at one time.
Select Models available for sale in online store. See drop down menu. For larger sizes please contact us for assistance with sizing and purchase.
- Features
- Sizing
- Product Literature
- Product Inquiry
- Controls chilling or heating equipment
- Push button controls for easy programming of set points, differential, and heating/cooling mode
- Keypad lockout to prevent tampering
- Non-volatile memory retains control settings during power outages
- Programmable in Fahrenheit or Celsius
- Differential programmable to 1ºF
- Titanium encapsulated sensor for maximum protection from water
- Microprocessor based operation for accurate temperature settings.
- Includes power cord and remote sensor on 8ft cable
- NEMA 4x rated water tight enclosure protects internal electrical
- Rated for indoor/outdoor use
- Easy plug in design (most models)
The following tables serve as a guideline for choosing the correct controller for your Aqua Logic equipment. Please contact us if you need further assistance.
Single-stage Digital Controllers:
| Model Number | Voltage VAC | Full Load* | Locked Rotor* | Heater Resistive* | Prewired for the following: |
|---|---|---|---|---|---|
| TR115SN | 115 | 9.8 | 58.8 | 9.8 | 1/4 thru 1/2 HP Chillers 115V |
| TR230SN | 230 | 4.9 | 29.4 | 4.9 | 1/2 HP Chiller 230V |
| TRSN | 115 / 230 | 9.8 / 4.9 | 58.8 / 29.4 | 9.8 / 4.9 | Replacement for Multi-Temp chillers 230V |
| TR24SN | 24 | 9.8 / 4.9 | 58.8 / 29.4 | 9.8 / 4.9 | Replacement for Multi-Temp chillers 460V |
NOTE:
*AMP LOAD CAPACITY.
Duel-stage Digital Controllers:
| Model Number | Voltage VAC | Full Load* | Locked Rotor* | Heater Resistive* | Prewired For The Following |
|---|---|---|---|---|---|
| TR115DN | 115 | 9.8 | 58.8 | 9.8 | 1/4 Thru 1/3 HP |
| TRDN | 115/230 | 9.8/4.9 | 58.8/29.4 | 9.8/4.9 | Replacement for Titan & DSHP-4 Thru 10 Heat Pumps |
| TR24DN | 24 | 9.8/4.9 | 58.8/29.4 | 9.8/4.9 | Replacement for Titan Heat Pumps 460V |
NOTE:
*AMP LOAD CAPACITY.
- INSTRUCTIONS-Single Stage Temperature Controller
- INSTRUCTIONS-Dual Stage Temperature Controller
- INSTRUCTIONS- DC Series Single Stage Temperature Controller
- INSTRUCTIONS- DC Series Dual Stage Temperature Controller
- INSTRUCTIONS- DC Series Single Stage RAW Replacement Controller for all MT Chillers and DX HEX (Model DC24S)
- INSTRUCTIONS- DC Series Dual Stage Temperature Controller for HEAT PUMPS
- SPEC SHEET- DC115-20 & DC230S Temperature Controller
- SPEC SHEET- ADC-4-220 Temperature Controller
- SPEC SHEET-ADC-6-220 Temperature controller
- SPEC SHEET-ADC-12-2201 Temperature Controller
- SPEC SHEET-TR115DN Temperature Controller
- SPEC SHEET-TR115SN Temperature Controller
- SPEC SHEET-TR230SN Temperature Controller
- SPEC SHEET-TRDN24 Temperature Controller w/ bare sensor
- SPEC SHEET-TRSN & TRDN Temperature Controllers
- SPEC SHEET-TRSN24 Temperature Controller w/ bare sensor & Titanium sensor well
Interested in this product line? Just fill out the form below and we'll get in touch shortly with answers to your questions and solutions for your problems.
