Titan Heat Pumps by Aqua Logic are designed for a wide range of commercial-duty applications. All Titan Heat Pumps feature an insulated titanium heat exchanger and a commercial-grade condensing unit, mounted together on a stainless steel frame. Suitable for outdoor installation and guaranteed to reliably deliver stable temperature control in the range of 40-85ºF.

Titan Heat Pumps up to 5hp have a specialized spiral condenser coil which has proven to have superior heat transfer performance and capacity over conventional radially finned condenser coils, and has a much greater resistance to corrosion in harsh environments.

For Cooler Climates: If ambient air temperatures can fall below 55ºF when operating the unit in cooling mode, low ambient controls must be installed on the condensing unit. This will allow the unit to operate in cooling mode in air temperatures down to 0ºF.

When exposed to colder air temperatures, ice may form on the condenser, in which case the unit will automatically go into defrost mode based on a preset time interval.

In Heating Mode, the heat pump will lose efficiency with air temps below 45ºF, and it is recommended that you switch to electric or gas heat. Please consult Aqua Logic if you expect temperatures below 45ºF. Precautions must be taken to ensure water flow is not interrupted to the unit during freezing conditions to prevent exposed outdoor water lines and the heat exchanger from freezing. If the unit will not be in use during freezing conditions, the outdoor plumbing and heat exchanger should be completely drained of water.