Resources
Product Sizing, Specifications, Drawings, Literature and More.
A number of factors influence the correct size of heat exchanger required for your application. While standard Btu calculations can be applied, and our specifications can offer some guidelines, the parameters of your application will be the deciding factor in correct size selection.
For use as a water chiller: ‘HX-DX’ models
*Minimum flow rate at 65F and above. At 65F and below 120GPM minimum flow rate.
** Units 10Hp and larger will have a dual circuit on a manifold if ordering from the specification tables above. For dual circuit and two points of connection order ‘DXD’ models from specification table below.
For use as a heat pump: ‘HX-DX-HP’ models
Dual Circuit for use as water chiller: ‘HX-DXD’ models include a dual circuit.
Optional on units 10 Hp and larger.
*Minimum flow rate at 65F and above. At 65F and below 120GPM minimum flow rate.
- SPEC SHEET- 1/4Hp Thru 1Hp Direct Expansion HEX (HX-3-DX to HX-12-DX)
- SPEC SHEET- 1/2Hp Thru 5Hp Direct Expansion HEX (HX-24-DX to HX-60-DX)
- SPEC SHEET- 1/2Hp Thru 5Hp Direct Expansion HEX (HX-24-DXV to HX-60-DXV)
- SPEC SHEET- 7.5Hp Direct Expansion HEX (HX-65-DX)
- SPEC SHEET- 7.5Hp Thru 20Hp Direct Expansion HEX (HX-90-DX to HX-240-DX)
- SPEC SHEET- 2Hp Thru 5Hp Direct Expansion HEX for HEAT PUMP (HX-24-DXHP to HX-60-DXHP)
- SPEC SHEET- 10Hp Thru 20Hp Direct Expansion HEX for HEAT PUMP (HX-120-DXHP to HX-240-DXHP)
- INSTRUCTIONS- Direct Expansion HEX & Direct Expansion HEX for Heat Pump
- SIZING WORKSHEET
- SIZING WORKSHEET for Heat Exchangers
A number of factors influence the correct size of heat exchanger required for your application, including the temperature of your supply water. While standard Btu calculations can be applied, and our specifications can offer some guidelines, the parameters of your application will be the deciding factor in correct size selection.
Contact us today for help with sizing the perfect unit for your needs.
- 1/5 Hp (1,800 BTUs) and Larger
- Complete Package
- Titanium Tube Sheet Heat Exchanger
- Insulated PVC Shell
- Stainless Steel Mounting Frame
- Digital Temperature Controller
- 3-way Water Solenoid Valve
- Water Flow Meter
- Inline Strainer
- Customized plumbing
- Easy Installation
- Compact Design
- Fresh or Saltwater Use
- Use on Hot or Chilled Loops
System Requirements:
- If using with a hot water loop please specify at time of order and heat exchanger barrel will be made in CPVC
- Each pack requires a 120v electrical outlet
- Bypass or isolation valves should be installed for servicing heat exchanger while system is running
- Observe min and max flow rates specific to your set temperature
- An external pump is required to move water through the heat exchanger.
- SPEC SHEET- 3,000-12,000 BTUH HEAT EXCHANGER (HX-3-W to HX-12-W)
- SPEC SHEET- 24,000-60,000 BTUH HEAT EXCHANGER (HX-24-W to HX-60-W)
- SPEC SHEET- 24,000-60,000 BTUH VERTICAL HEAT EXCHANGER (HX-24-WV to HX-60-WV)
- SPEC SHEET- 90,000-240,000 BTUH HEAT EXCHANGER (HX-90-W to HX-240-W)
- INSTRUCTIONS- Water-to-Water Heat Exchangers
- SIZING WORKSHEET
- SIZING WORKSHEET for Heat Exchangers
A number of factors influence the correct size of heat exchanger required for your application. While standard Btu calculations can be applied and our specifications can offer some guidelines, the parameters of your application will be the deciding factor in correct size selection.
Contact us today for help with sizing the perfect unit for your needs.
A. BTUH rating is based on use of R-134 refrigerant.
B. 3/4″ &1-1/2″ is FPT; 2″ is SLIP
*Water must be pumped through the chiller. Pump is not included.
C. Length dimensions may vary by a few inches.